We disassembled the device and found the board with severe impact damage and bent. We did a thermal reading on the board and it’s looks like there is overheating of the UFS chip on power being applied. There is a few different approaches we can take with this device to recover data. Sometimes the boards can survive bends like this, but lose function like cellular, sound, camera ect but still be able to work enough to retrieve data. Because of the thermal reading your board is giving , I’m...

iPad comes in with no power, not charging. USB protocol PD 15w showing but only pulling .2 Watts. Once Device is disassembled we find some corrosion inside. Checking charging port shows burned pins. Removed charging port shows signs of liquid damage underneath. Corrosion near main PMIC. No VCC_main short. No power when prompted to boot from DC power supply, only pulls .05 watts. After removing big shield for charging ic we find extensive damage from liquid. Unfortunately there is a lot...

iPad is presented to the repair shop with no power, having been diagnosed as a motherboard issue by a different repair shop. Upon disassembly we have found that the device has a broken battery connector, a damaged battery, and ripped digitizer cable. Damaged Flex cable on digitizer Battery bent, still functional. The battery connector is clearly damaged and missing pieces Outside of that, we also found the charging port to be burned and shorted out. Burned charging port, likely liquid damage....